TMS320C6748: 用URAT2往NANDFLASH烧录程序 Programming application into fl... - TMS320C6748 - 嵌入式开发者社区 - 51ele.net
设为首页收藏本站

嵌入式开发者社区

 找回密码
 立即注册

QQ登录

只需一步,快速开始

查看: 1170|回复: 1

[已解决] TMS320C6748: 用URAT2往NANDFLASH烧录程序 Programming application into fl...

[复制链接]

3

主题

6

帖子

1059

积分

金牌会员

Rank: 6Rank: 6

积分
1059
发表于 2022-10-14 11:03:05 | 显示全部楼层 |阅读模式
C:>.\sfh_OMAP-L138 -flash_noubl -targetType C6748 -flashType NAND -p COM10 GPIO_LED2222222.ais
TI Serial Flasher Host Program for OMAP-L138
(C) 2014, Texas Instruments, Inc.
Ver. 1.67
[TYPE] Single boot image
[BOOT IMAGE] GPIO_LED2222222.ais
[TARGET] C6748
[DEVICE] NAND
[NAND Block] 1

Attempting to connect to device COM10...
Press any key to end this program at any time.

(AIS Parse): Read magic word 0x41504954.
(AIS Parse): Waiting for BOOTME... (power on or reset target now)
(AIS Parse): BOOTME received!
(AIS Parse): Performing Start-Word Sync...
(AIS Parse): Performing Ping Opcode Sync...
(AIS Parse): Processing command 0: 0x58535901.
(AIS Parse): Performing Opcode Sync...
(AIS Parse): Loading section...
(AIS Parse): Loaded 19808-Byte section to address 0x11800000.
(AIS Parse): Processing command 1: 0x58535901.
(AIS Parse): Performing Opcode Sync...
(AIS Parse): Loading section...
(AIS Parse): Loaded 1364-Byte section to address 0x11804D60.
(AIS Parse): Processing command 2: 0x58535901.
(AIS Parse): Performing Opcode Sync...
(AIS Parse): Loading section...
(AIS Parse): Loaded 20-Byte section to address 0x118052F0.
(AIS Parse): Processing command 3: 0x58535901.
(AIS Parse): Performing Opcode Sync...
(AIS Parse): Loading section...
(AIS Parse): Loaded 16-Byte section to address 0x11805304.
(AIS Parse): Processing command 4: 0x58535906.
(AIS Parse): Performing Opcode Sync...
(AIS Parse): Performing jump and close...
(AIS Parse): AIS complete. Jump to address 0x11804620.
(AIS Parse): Waiting for DONE...
(AIS Parse): Boot completed successfully.

Waiting for SFT on the OMAP-L138...

Flashing application GPIO_LED2222222.ais (5764 bytes)

100% [ ████████████████████████████████████████████████████████████ ]
Image data transmitted over UART.

0% [ ------------------------------------------------------------ ]
Programming application into flash...
回复

使用道具 举报

0

主题

110

帖子

476

积分

管理员

Rank: 9Rank: 9Rank: 9

积分
476
发表于 2022-10-17 08:57:10 | 显示全部楼层
您好,应用程序烧写出现异常,您可以试下使用Demo目录下StarterWare/Binary/nandboot路径下的ais文件测试下,初步怀疑可能您转化的ais文件有异常。
回复 支持 反对

使用道具 举报

您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

QQ|手机版|小黑屋|嵌入式开发者社区 ( 粤ICP备15055271号

GMT+8, 2024-3-28 17:09 , Processed in 0.036035 second(s), 24 queries .

Powered by Discuz! X3.2

© 2001-2015 Comsenz Inc.

快速回复 返回顶部 返回列表