OMAPL138使用XDS200的问题

zycdlv0903

开发板拨码为01111 DEBUG模式,XDS200驱动正常
目标配置时尝试过使用TI XDS2XX USB和USB ON BOARD两个版本，连接测试均正常，给ARM装载GEL连接后提示
% m; u- Z. D$ T
. r- W2 X# g& v9 ?5 d& WError connecting to the target:
3 @8 X9 C/ p( g3 B/ ](Error -2062 @ 0x32D0)
6 i! O" g  D/ Z  A- c! aUnable to halt device. Reset the device, and retry the operation. If error persists, confirm configuration, power-cycle the board, and/or try more reliable JTAG settings (e.g. lower TCLK).
(Emulation package 5.1.232.0)
9 z& N" ?, i4 D5 n4 \
8 l  }+ v+ w) H7 w) I# G; S2 o查看常见问题手册重启CCS后问题依旧

human

建议把拨码开关调到debug模式